Industrial telephone TOP supplier in China Waterproof emergency roadside telephones SOS phone system for Tunnel/Marine/Railway KNSP03

KNSP-03-railway-telephones
We are a railway telephones manufacture. we produce large quantity of emergency roadside telephones and export to many countries. ERT (emergency roadside telephones) are widely used in railway trackside. Most of metro line under ground inside the tunnel need to install railway telephone. This railway telephones installed at outdoor and need waterpoof IP66. The railway telephones need to be rugged and rubost. In some countries ERT called ECB (emergency call box).
DESCRIPTION ITEM
1. Robust aluminium alloy die-cast body, Vandal & tamper-resistant hardware, easy Installation.
2. Waterproof rating IP66 dust proof.
3. Without keypad, hotline setting.
4. Door cover: orient automatically and good self - closing, convenient for use.
5. Weather resistant to IP66 standard, service temperature range from -30 degree to +75 degree.
6. Magnetic reed hook-switch.
7. Lightening protection to ITU-T recommendation K.21.
8. Heavy Duty handset with hearing Aid compatible receiver, Noise canceling microphone.
9. Handset with industrial strong curly cord .
10. Silicon keypad keep waterproof and dusty proof.
11. Phone integrity wiring to enable the telephone system to check if the telephone unit is still
Operational.(if PABX have this available we can provide this function).
12. Optional 7 minute time out to release the line if the handset is left off hook. This function
upon buyer’s requirement).
13. Powder coated in UV stabilized polyester finish.
14. The housing covered with a layer of reflective label for easy identification at night.Optional
15. Application: Tunnel, metro, railway, LRT, speedway, marine, ship,offshore, mine, power plant,bridge etc.
Rugged weather proof telephone specification: (Analogue version is optional.)
KNSP-03 rugged tunnel telephone specification (VoIP SIP2.0 telephone ) |
MTBF: | 100000hours |
MTTR: | 2 hours |
Communication: | Auto-dial without keypad |
Call Control Signaling: | VOIP SIP Info(DTMF), RFC 2833(DTMF) |
Power: | Power over Ethernet, IEEE802.3af, Class 0 Local power, 12VDc,Idle 2W, Max 10W |
Auxiliary Contacts: | 1 Aux Output, dry contact |
Contact Ratings. Load: | Resistive load |
Rated load: | 0.3 A at 125 VAC; 1 A at 30 VDC |
Rated carry current: | 1A |
Max.switching voltage: | 125V AC, 60V DC |
Max.switching current: | 1A |
Audio Codes: | G.711, G.722, G.729 |
IP Protocols: | IPv4, TCP, UDP, TFTP, RTP, RTCP, DHCP, SIP |
LAN Protocols: | Power over Ethernet(PoE,802.3af), WLAN(IEEE 802.3af), Network Access |
Echo cancellation code: | G.167/G.16 |
Network: | 10/100 BaseTX Ethernet, RJ45 connectors, Cat5e or better |



